You’ve Got Damage from a Construction Defect – How Do You Know How Much Invasive Testing is Sufficient?

Community associations are often given common elements in transition that incur damage from design and/or construction deficiencies. Associations typically have limited funds. Even those with ample financial resources are usually governed by Boards whose members are keenly aware of the fact that the Association’s funds are trust monies that need to be carefully managed and wisely expended.

Most board members do not have construction experience and are not lawyers or design professionals. They often do not know what to think when advised by counsel and engineering professionals that invasive testing is needed to permit investigation and documentation of the Association’s claims. Even when confronted with evidence of water infiltration, which they suspect or know may be causing damage, many association have an initial inclination not to want to spend a lot of money on engineering and forensic investigations. Once limited, preliminary testing shows a problem exists, and litigation becomes necessary, the question becomes, “How much testing is needed to support the association’s claims?” This blog is intended to help give some perspective to boards facing such a decision.

In Federal and most State courts, admissibility of scientific expert witness testimony is governed by the “Daubert” standard articulated in Daubert v. Merrell Dow Pharmaceuticals, 509 U.S. 579 (1993). The key purpose of the Daubert standard is to ensure that the proposed expert testimony is both relevant to the issues in dispute and the evidence in support thereof is reliable.

Under Daubert, “the test of admissibility is not whether a particular scientific opinion has the best foundation, or even whether the opinion is supported by the best methodology or unassailable research. Rather, the test is whether the ‘particular opinion is based on valid and reliable methodology. The admissibility inquiry thus focuses on principles and methodology, not on conclusions generated by the principles and methodology. Once admissibility has been determined, then it is for the trier of fact to determine the credibility of the expert witness.” In re TMI Litig., 193 F.3d 613, 665 (3rd. Cir. 1999).

Generally, expert testimony is permitted when:

  1. The expert’s scientific, technical, or other specialized knowledge will help the trier of fact to understand the evidence or to determine a fact in issue
  2. The testimony is based on sufficient facts or data
  3. The testimony is the product of reliable principles and methods
  4. The expert has reliably applied the principles and methods to the facts of the case

Many state courts have adopted nearly verbatim Federal Rule of Evidence 702. For example, the New Jersey Rules of Evidence state:

“If scientific, technical, or other specialized knowledge will assist the trier of fact to understand the evidence or to determine a fact in issue, a witness qualified as an expert by knowledge, skill, experience, training, or education may testify thereto in the form of an opinion or otherwise.”

It is impossible for any association to afford to pay for its experts to invasively test every inch of a building. That is why courts allow parties to use limited invasive testing done by experts to support an opinion that the same conditions found in the limited testing exist everywhere on the buildings. This process is known as “extrapolation.”

The trial Judge is the gatekeeper of the evidence the jury gets to hear at trial. As a general matter, the use and admissibility of expert testimony based on extrapolation supporting claims of damages caused by design and construction deficiencies is based on an evaluation by the Judge of:

  1. The randomness of the sample
  2. The size of the sample

A detailed discussion of these concepts is beyond the scope of this blog. Generally, a sample must be randomly selected for its results to be fairly extrapolated. It has been said that a random sample is one in which each member of the population has an equal probability of being selected for inclusion in the sample. Absent random selection of samples, courts fear the occurrence of “selection bias.” This can be countered by proper planning. For example, if you have a case where there is suspected damage from water infiltration through exterior walls, your expert could do a reasonable number of moisture probes of each side of each building, augmented by invasive test cuts in selected locations.

The case law on allowing experts to extrapolate from their findings is extremely fact sensitive and voluminous. It is imperative that your attorney be familiar with it in order to plan the investigation with your expert. In some cases, you may even need the services of a statistical expert. What is clear is that the Association needs to have counsel and its experts devise a plan for how to provide sufficient testing to satisfy the Daubertrequirements for admissibility. That process will then allow the Association to understand how much money it needs to spend in order to prove its case and collect damages through mediation or trial.

Triggering the Protections of the Consumer Fraud Act with Breach of Contract

You hire an architect to prepare plans for the construction of a new home and a developer to execute those plans and physically construct the home. The plans require the testing of the underlying soil to confirm that the bearing capacity of the soil is adequate to support the weight of the structure. The builder, despite being contractually obligated to build the home in accordance with the plans and specifications, does not test the soil.

As a result, after the structure is erected, you notice substantial cracking and differential settlement throughout the house. The builder assures you this is just “a normal part of the settling process.” You later find out that a substantial portion of the house was constructed on soil with a bearing capacity that is considerably less than what is required, and the house is slowly sliding down a hill and uninhabitable. You bring suit against the developer for breach of contract. Can you also claim a violation of the Consumer Fraud Act and seek triple damages and attorneys’ fees?

Read More about Triggering the Protections of the Consumer Fraud Act with Breach of Contract

Insurers of General Contractors Can No Longer Hide Behind Business Risk in Refusing to Defend Their Insureds in Construction Defect Litigation

Generally speaking, a contractor’s commercial general liability (“CGL”) policy is designed to cover personal injury or property damage caused by an accident resulting from the contractor’s work. The policy is not meant to be a guarantee of the contractor’s work and therefore does not cover damages to the work itself – instead, these are known as “business risk” damages. The concept that is inherent in every agreement for the performance of construction work is the risk that the work will be done improperly.

By selecting a particular contractor, the owner has to make a business judgment as to the qualifications and reliability of the selected contractor, and therefore assumes the risk that the work will be done incorrectly. If the work is done improperly and needs to be corrected, the contractor, and ultimately the owner, bears the burden of repairing or fixing that faulty work. The contractor’s insurance is not a performance bond guaranteeing the work; instead, the commercial general liability insurance is designed to cover any unexpected damages that arise from the contractor’s work, such as damage to other property caused by the faulty work.

Consider a roofer hired to install a new roof on a building. Once completed, the roof is the roofing contractor’s “work.” If the roofer installs the wrong type of shingles, but does everything else correctly, the only “damage” to speak of would be to the roof shingles themselves, i.e. the roofer’s work. The cost of replacing the shingles is therefore that “business risk” not covered by insurance.

Read More about Insurers of General Contractors Can No Longer Hide Behind Business Risk in Refusing to Defend Their Insureds in Construction Defect Litigation

The “Continuous Trigger” Theory and Construction Defect Actions: Cypress Point Condominium Association v. Selective Way Insurance Co.

A New Jersey trial court granted summary judgment in favor of Selective Insurance Company holding that the “continuous trigger” theory does not provide insurance coverage subsequent to the manifestation of damages that arose from a subcontractor’s negligence in the construction of a condominium development. The issue arose in the matter of Cypress Point Condominium Association v. Selective Way Insurance Company, et al., Docket No. HUD-L-936-14, 2015 N.J. Super. Unpub. LEXIS 721 (N.J. Super., Hudson Cnty. Mar. 30, 2015) (“Cypress Point”).

“The ‘continuous trigger’ theory holds that an occurrence occurs under an insurance policy each time damage accrues over a continuous period of time, from ‘exposure to manifestation’.” Cypress Point, at *12. Courts developed the “continuous trigger” theory to counter scientific uncertainties surrounding initial manifestations of damages typically at issue in environmental, toxic tort, and delay manifestation property damage claims. Id.

In Cypress Point, the Cypress Point Condominium Association (the “Association”) filed a Declaratory Judgment Action against Selective Way Insurance Company (“Selective”) seeking a declaratory judgment that Selective owed a duty to indemnify its insured, MDNA Framing, in connection with an underlying construction defect action filed by the Association. The Association filed an amended complaint in the underlying action on June 12, 2012, bringing claims against MDNA Framing, which was contracted to perform framing and window installation work in connection with the construction of the Cypress Point condominium development. Construction of the development commenced in 2002 and was substantially completed in 2004. Subsequent to the completion of construction, unit owners began to experience water infiltration around the interior windows. The Association’s liability expert found numerous defects related to MDNA Framing’s work, including missing flashings, a lack of a continuous water management system, and improper sealant application around the windows. The Association’s liability expert issued his initial report opining on these deficiencies on June 30, 2012.

Read More about The “Continuous Trigger” Theory and Construction Defect Actions: Cypress Point Condominium Association v. Selective Way Insurance Co.

Practical Tips for New Construction Homebuyers

Purchasing a new construction home is an exciting endeavor. Once all the design options and custom changes are finalized, the wait begins. While all builders discourage purchasers from visiting the construction site, most builders will accommodate requests for walkthroughs. It is always a good idea, however, to try and include a provision in the sale contract or addendum providing you, the homeowner, the right to request and receive access to the site upon reasonable notice.

So, what should you do while on site? The most important thing you can do is take pictures (a lot of pictures). Specifically, you want to capture critical areas such as around windows and doors, at roof-to-wall intersections, and to the extent visible, any installed flashing such as building paper, drip caps, Tyvek, etc. Some more obvious things to look for are wall locations, number and placement of windows and doors, proper room layouts, etc. If you are so inclined, you may want to hire a professional engineer or architect to perform a cursory walkthrough with you and provide you with comments and concerns. Once the walls get covered up, it becomes much more difficult, if not impossible, to observe hidden construction elements and/or fix mistakes.

If you can, you should get to know the superintendent and ask a lot of questions. You should also request to see a copy of the plans and take pictures of the various details and specifications. Additionally, you may want to fill out an OPRA (Open Public Records Act) request form and submit it to the construction office. You are entitled to see any and all public records attendant to your build lot, which includes permit applications, issued permits, inspection reports, violation notices, filed plans and drawings, etc. This is a good way to gather information and stay informed about the construction process.

Finally, if you have the opportunity, you should visit your house during a heavy rain event and observe the conditions around windows and doors from the inside. This is the best time to identify any leaks around penetrations such as windows and doors. Once the drywall is installed, if there are leaks, you will not see any manifestations of water intrusion for many months, sometimes even years. By then, the Developer will likely no longer be responsive and the new homeowner warranty program will essentially be useless.

Understanding the Relationship Between the Architect, General Contractor, Subcontractors and Building Inspector for Construction Defects

Unitowners in condominium associations and homeowners in homeowner associations are often confused about the legal responsibilities of design professionals, general contractors, subcontractors and municipal building officials and building inspectors regarding construction of their homes. This blog is intended to briefly clarify and explain the relationship among these various people and entities.

Architects are licensed professionals who design buildings to meet the needs of the owner. They are required to adhere to all applicable building codes and standards in the industry. To that end the architect creates construction drawings, details, and specifications to direct the subcontractors as to the materials or systems they are to use and how those materials and systems are to be integrated into the overall construction in such a manner as to satisfy the design intent of the architect. Architects have to have an overall understanding of the systems and materials being designed into a building and the requirements of the applicable building codes governing construction. The scope of work of the architect varies from job to job and is typically defined by the contract signed by the architect. For example, the scope of work could be as narrow as being hired by builders to simply produce a set of construction drawings that can be used by the builder to obtain a building permit. After that, the architect has no further involvement. At the other end of the spectrum, the architect is involved in reviewing and approving submittals of materials the builder or subcontractors want to use on the project, reviewing contractor applications for payment of invoices, and even reviewing work done by the general contractor/subcontractors in the field for compliance with the plans, manufacturer’s installation specifications, and details.

The Building Department of the municipality is responsible for protecting life and safety. They review the architectural and other construction drawings for compliance with building codes prior to issuing a building permit. They review things like the height of the building, square footage, intended occupancy, fire ratings, seismic requirements, and other considerations with an eye towards keeping the public safe. Once construction is under way, the building inspectors visit the site to check to see if the building is being built per the codes and approved plans. When construction defects are discovered and damage is found, many homeowners and condominium unit owners want to know why the building inspector and township are not responsible. While they may have some moral responsibility, the law of New Jersey gives them a qualified immunity from liability for negligence in doing building inspections. In the absence of fraud (ie, taking bribes), the building inspectors and the municipalities are immune from civil liability. This immunity was presumably granted by the legislature to prevent every municipality in New Jersey from being bankrupted by construction defect cases.

Read More about Understanding the Relationship Between the Architect, General Contractor, Subcontractors and Building Inspector for Construction Defects

Blog Categories